Keg System

Kegging systems include:

5 gallon ball lock or pin lock keg, reconditioned. We have cleaned the keg, inside and out, have replaced the closure O ring, the plug O rings and pressure tested the keg.*

One new 5 pound capacity CO2 cylinder or one used 2.5 pound capacity CO2 cylinder**

One new Cornelius double gauge CO2 regulator with additional output shutoff check valve that will keep beer from backing up into your regulator. This is a high quality regulator.

One gas line with 1/4" MFL disconnects on each side and with a quick gas disconnect. The tubing is Bevlex Series 200 5/16" ID rated for 60 psi at 70F.

One liquid line with 1/4" MFL disconnect and quick liquid disconnect on one side and a plastic picnic tap on the other side. The tubing is Bevlex Series 200 3/16" ID rated for 80 psi at 70F.

The gasket that is placed between the regulator and the CO2 tank

The gasket that is placed between the regulator output and the gas line tubing

Instructions for use.

Photo sample shows a 5 gal. pin-lock keg with a 2.5lb CO2 cylinder. Appearance of keg and CO2 cylinder will vary.

Please remember to select your keg style preference (ball or pin lock) when ordering.

*(Kegs may still have a slight soda order when first received. This will not affect the flavor or quality of your beer, and will go away after first use)

**Due to shipping regulations, all CO2 cylinders are shipped empty.